This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering. Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering.

Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit. (For 3/4" wood use the 15/16" edgebanding)

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering.

Use 3/4" edging for 5/8" or 1/2" wood and then trim the overhang to fit. (For 3/4" wood use the 15/16" edgebanding)

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering.

Use this 15/16" edging for 3/4" wood and then trim the overhang to fit. This is easier than trying to perfectly line up 3/4" edgebanding on 3/4" wood.

This flat edge banding trim is a thin strip of PVC with an adhesive backing. You peel off the protective layer and press the strip against the product you are covering.

Use this 15/16" edging for 3/4" wood and then trim the overhang to fit. This is easier than trying to perfectly line up 3/4" edgebanding on 3/4" wood.

This trimmer can be used to trim t-molding to be flush to the end of the wood after it is installed. Good for t-molding up to 1" wide.

Quad Trimmer with carbon steel blades for trimming edgebanding and t-molding. With a comfortable and ergonomic design, it trims both sides of the trim in 1 pass, or pull it apart and use half the trimmer to trim just 1 side.

Trimmer with replaceable steel blade for trimming edgebanding and t-molding. Blade can be angled from 0 to 45 degrees.

The SpeedRoller PRO is an ergonomic laminate roller that can be used to easily install peel and stick edgebanding. The SpeedRoller includes 2 sets of interchangeable wheels.

Select from the option list the peel & stick edge banding you would like a free sample of.